Services & Pricing

starting from $75

Complete wear/damage assessment

Align/adjust derailleurs

Inspect/adjust brakes

True/tension wheels

Torque all bolts to factory specifications

Lubricate drivetrain

starting from $150

Basic Tune +

Deluxe bike wash

Labor For Cable, Chain, Grip & Spoke Replacement (Up to 3 Spokes)

All bearing systems are inspected and adjusted

Complete overhaul for full rigid starting from $250

Complete wear/damage assessment

Bike gets taken down to the bare frame

Align/adjust derailleurs

Inspect/adjust brake

True/tension wheels

Deluxe bike wash or drivetrain replaced

Hydraulic brake system flushed/bled

Disc brake surfaces cleaned

All cable-actuated components re- cabled

Tubeless system inspected and replenished as needed

Reassembly with all bolts torqued to specifications

All bearings serviced or replaced Installation of any replacement parts or upgrades

Complete overhaul for front suspension hardtail starting from $350

Full Rigid Overhaul +

Fork Full Service

Complete overhaul for full suspension bicycle starting from $500

Full Rigid Overhaul +

Fork Full Service

Shock Full Service

starting from $50

Manufacturers recommend this service every 50 hours of riding, or more frequently if you ride in harsh conditions.

Shock installed on hand dyno for damper functions check and air can removal

Inspected for structural failures

Cleaned

Air Can seals and O-rings are replaced

Reassembled with fresh grease and air can fluid

lnline shock starting from$110

Reservoir shock starting from $140

Fox X2/Rockshox Vivid Air starting from $160

Manufacturers recommend this service every 100-200 hours or yearly, whichever comes first.

Air can and damper disassembled

All components get fully cleaned and inspected

All seals and o-rings are replaced

Dampers are hand or vacuum bled

IFP chambers are charged with nitrogen

Air can is then reassembled with fresh grease and fluid

Last step final inspection of the damper on a shock dyno

Starting from $75

Manufacturers recommend this service every 50 hours of riding or more often if you ride in harsh conditions. Fork sliders are removed, cleaned, inspected for structural failures and worn bushings.

Dust Wipers and foam rings are replaced

Reassembled with fresh grease and bath oil

** Bushings will be replaced as needed at addition cost**

Starting from $125

Manufacturers recommend this service every 100-200 hours or yearly, whichever comes first.

Complete disassembly of both spring and damper

Inspected for structural failures and worn bushings

All components cleaned

Replace seals, o-rings, bladders, and other expendable components on both the air spring and damper

The damper will be hand bled or bled
with a vacuum

Functions check and final inspection

** Bushings will be replaced as needed at addition cost**

Tube/Tire install - $10

MTB/Road Tubeless Setup - $15

Tire Sealant Top-Off - $5

Wheel Build - $75

Wheel True and Tension - $40-$45

Labor + Spoke $2-$5 each

Install new hydraulic brake - $50

Bleed brake - $35

Brake caliper piston service - $15

Install brake cable/housing - $25

Adjust brake - $10

Install brake pads or rotor - $10

Align/Adjust front or rear derailleur - $15

Install derailleur cable w/ housing - $25

Chain install- $10

Bottom bracket install - $30

Crankset or chainring install - $25

Install pedals - $5

Update/tune Di2 - $15

Update Bosch/Shimano Ebike - $15

Pro bike build - $250

Suspension Linkage Overhaul - $75

Suspension Pivot Bearing Replacement - $20/pair

Box bike for shipping - $75

Box bike build - starting at $75

Cartridge dropper overhaul - $40

Basic bike wash - $40

Deluxe bike wash (Basic+ frame polish and drivetrain removed and detailed) - $75